AEG CHDF 6260 Operating And Installation Instructions - Page 7

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood AEG CHDF 6260. AEG CHDF 6260 21 pages. Electrolux cooktop user manual
Also for AEG CHDF 6260: Operating And Installation Instructions (21 pages), Operating And Installation Manual (21 pages), Operating And Installation Manual (22 pages), Operating And Installation Instructions (23 pages), Operating And Installation Instructions (22 pages)

Print Page

Maintenance and care

• The hood must always be disconnected from the mains power

supply before beginning any maintenance work.

• The purpose of the grease filters is to aspirate grease particles

which form during cooking and it must always be used, either in the

external evacuation or internal recycling function.

Attention: the metal grease filters must be removed and washed,

either by hand or in the dishwasher, every four weeks.

• Extract the vapout catcher, remove the rear grease filter pulling the

handle designed for this purpose, then proceed in the same way to

remove the front grease filter. Fig. 2.

Hand washing

• Soak grease filters for about one hour in hot water with a grease-

loosening cleaner, then rinse off thoroughly with hot water. Repeat

the process if necessary. Refit the grease filters when it are dry.

Dishwasher machine

• Place grease filters in dish washer. Select most powerful washing

programme and highest temperature, at least 65°C. Repeat the

process. Refit the grease filters when it are dry.

When washing the metal grease filter in the dishwasher a slight

discoloration of the filter can occur, this does not have any impact

on its performance.

• Clean the inner housing using a hot detergent solution only (never

use caustic detergents, abrasive powders or brushes).

Fig. 2