Kohler 10117 Installation Instructions - Page 2

Browse online or download pdf Installation Instructions for Plumbing Product Kohler 10117. Kohler 10117 3 pages. Perfomance showerhead

Print Page

Flush both water supplies through the shower arm(2, not provided)

for one minute before the shower head(1) is installed. Apply tape or

sealant to the exposed end of the shower arm. Tighten the shower

head with a strap wrench.

Before installation, install restrictor(3) if needed. For 16344, 10115

and 16358 for Thailand & Australia, put the restrictor into the

shower head as the figure shown. For 10114 and 10117 for

Thailand, take out washer and install restrictor(3) as the figure

shown, reinstall washer.

All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with

clean soft cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc.

which could adversely affect the finish and are not recommended for cleaning.

Do not use abrasive cleaners or solvents on Kohler faucets and fittings.

1069894-2A-B