Kohler 16366 Installation Instructions
Browse online or download pdf Installation Instructions for Plumbing Product Kohler 16366. Kohler 16366 2 pages. Handspray with hose
Print PageINSTALLATION INSTRUCTIONS
16364
16366
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co.
reserves the right to make changes in product characteristics, packaging, or availability at any time without
notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove debris before installation.
2. The highest working pressure for handspray & shower head is 0.5MPa(5 bar). If it exceeds 0.5MPa(5 bar),
a pressure reducer is needed. The highest water and environment temperature is 60 ºC. Please keep
handspray, shower head and the shower arm away from heater, or it may become damaged and cause injury
to the user.
ROUGH-IN DIMENSIONS
G1/2˝
16364
INSTALLATION
Filter washers(1) provided with shower hose(2) must be installed in
each end of hose(2). For 16366/10377, put the washer(4, thickness 5mm)
instead of washer(1) at the end which connect to the handspray.
For 37432,
Put the check valve(5) into the handspray(3) inlet. Put the
restrictor(6) into the handspray inlet if needed.
Note: Keep the O-ring of the check valve outward.
Connect shower hose to handspray(3) and the water supply.
1069818-2A-B
10377
10109
G1/2˝
37432
16366
37432
HANDSPRAY WITH HOSE
G1/2˝
10377
Handspray with Hose
G1/2˝
G1/2˝
10109
3
1
G1/2˝
G1/2˝
5
6
3
4
1
2
1