A-Neuvideo HD-22 Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Matrix Switcher A-Neuvideo HD-22. A-Neuvideo HD-22 12 pages. 2x2 hdmi matrix switcher

Print Page

Before making any connections to the HD-22. Observe the following:

> Ensure the mains voltage supply matches the label on the

supplied plug- Pack (+/- 10%)

> Ensure that the power switch is OFF

> Ensure that all system grounds (earth) are connected to a

common point.

> Avoid powering equipment within a system from multiple

power sources that may be separated by large distances

REMOTE CONTROL

1. & 2. SWITCH POWER ON or OFF:

Controller with a power ON and OFF

3. PORT- 1 INPUT SOURCES SELECTION:

OUTPUT-1 Select input 1 & 2 sources with selection button.

4. PORT- 2 INPUT SOURCES SELECTION:

OUTPUT-2 Select input 1 & 2 sources with selection button.

REMOTE CONTROL

> Connect all audio video sources and destination equipment

> Power up all source and destination audio-visual sources

> For each destination output select the appropriate input source

IR remote control. Or through the RS-232 serial communications port.

> Upon power up the switcher will return to its last used setting

by using the front panel input 1 & 2 select buttons. The supplied

before Powered down.