A-Neuvideo ANI-5PLAY Instruction Manual - Page 6
Browse online or download pdf Instruction Manual for Extender A-Neuvideo ANI-5PLAY. A-Neuvideo ANI-5PLAY 12 pages. Hdmi + lan extender poh cat5e/cat6 hdbaset
Also for A-Neuvideo ANI-5PLAY: Instruction Manual (10 pages)
Print Page
A
NEUVIDEO
Transmitter
INPUT LED:
Input status indicating lamp. This red LED illuminates when the HDMI signal is plugged in.
q
HDMI IN:
HDMI input port. This slot is where you connect the HDMI source.
w
ETHERNET:
This slot provides internet signal from the receiver or to the receiver.
e
RS-232:
Phoenix jack provides Serial port control from the receiver or to the receiver.
r
DC IN:
Plug the 24V DC power supply into the unit.
t
IR RX:
Chanel 1 IR Receiver. Connects with the Wideband IR Rx.
y
IR TX:
Chanel 2 IR Transmitter. Connects with the Wideband IR Tx.
u
LINK LED:
Connection status indicating lamp.
i
• Illuminated:
The Transmitter and Receiver have good connections.
• Flashing:
The Transmitter and Receiver have poor connections.
• Dark:
The Transmitter and Receiver are not connected.
HDBaseT
OUT:
HDBaseT
o
™
568B standards.
DATA LED:
Data status indicating lamp.
a
• Illuminated:
The HDMI signal has HDCP.
• Flashing:
The HDMI signal is without HDCP.
• Dark:
No HDMI signal.
signal output port. Connects the HDBaseT
™
OPERATION CONTROLS AND FUNCTIONS
receiver with a UTP cable following IEEE-568A or IEEE-
™
4