A-Neuvideo ANI-HPNHN Instruction Manual - Page 5

Browse online or download pdf Instruction Manual for Media Converter A-Neuvideo ANI-HPNHN. A-Neuvideo ANI-HPNHN 8 pages. Hdmi to hdmi scaler

Print Page
A
NEUVIDEO

FRONT PANEL

HDMI OUTPUT:
Connect to a HDMI equipped display or AV receiver for video and audio output.
q
OPTICAL OUTPUT:
Connect to an amplifier or active speakers with an optical cable for LPCM 2 channel digital audio output.
w
:
AUDIO OUTPUT
Connect to an amplifier or active speakers with a 3.5mm mini-jack cable for analog audio output.
e
MENU Button:
Press this button to enter the OSD (On-Screen Display) menu and press it again to make a selection.
r
+/− Button:
Press these buttons to:
t
When in the OSD menu
• Navigate up/down the OSD menu
• To adjust the value of a menu selection
• Under normal operation (outside of OSD menu)
• Press the "+" button together with the "MENU" button to switch the output resolution to XGA@60 (1024×768).
• Press the "-" button together with "MENU" button to switch the output resolution to 720p@60.
• Press both the "+" and "-" buttons at the same time to reset the device to the default settings.

BACK PANEL

HDMI INPUT:
Connect to an HDMI source device such as a Blu-ray player or set-top box with an HDMI cable or to a DVI source device
q
such as a PC/Laptop with a DVI to HDMI adaptor.
AUDIO INPUT:
Connect to the analog audio output of the source device such as a PC/Laptop with a 3.5mm mini-jack cable.
w
OPTICAL INPUT:
Connect to the optical digital audio output of the source device such as DVD/Blu-ray player with an optical cable.
e
SERV.:
Reserved for firmware update only.
r
DC 5V:
Connect the 5V DC power supply to the unit and plug the adaptor into an AC outlet.
t
Power LED:
This LED will illuminate once the unit is connected to an active power supply.
y
OPERATION CONTROLS AND FUNCTIONS
3