AEG Perfekt Glide-30 Instruction Manual - Page 9
Browse online or download pdf Instruction Manual for Ventilation Hood AEG Perfekt Glide-30. AEG Perfekt Glide-30 17 pages. Built-in range hood
Also for AEG Perfekt Glide-30: Instruction Manual (18 pages), Instruction Manual (17 pages), Instruction Manual (20 pages)
Print Page
Cabinet Preparation for Hood Support
The range hood should be mounted at a distance of 600mm
from an electric or induction cooktop, and 762mm above a
gas cooktop for safety and optimum performance.
Use the diagram below for proper placement of ductwork
and electrical cutout in cabinet. For a non-ducted
installation, DO NOT cut a duct access hole.
Warning! When cutting or drilling into wall or cabinet, be
careful not to cut existing electrical wiring.
1. If the bottom of the cabinet is recessed above the
bottom of the cabinet door, then it is necessary to
install wood strips on each side of the recessed area
on the bottom of the cabinet where the range hood
will be mounted. The wood strips should line up with
the 4 keyhole slots on the top of the range hood.
If you install the hood with a duct,
you will need to provide a hole for
the duct. Please use the template
provided to locate the hole.
8
|
P a g e