AEG SILENCETECH 9000 User Manual - Page 8

Browse online or download pdf User Manual for Ventilation Hood AEG SILENCETECH 9000. AEG SILENCETECH 9000 12 pages.

Print Page

5.2 Hob²Hood function

It is an automatic function which connects the

hob with a hood. Both the hob and the hood

have an infrared signal communicator. Speed

of the fan is defined automatically on basis of

mode setting and temperature of the hottest

cookware on the hob. You can also operate

the fan using the hob manually. The function

can be activated from panel of the hob.

For more information how to use the

function refer to the hob user manual.

5.3 Activating Maximum Motor

Speed

When you press the button

Motor Speed starts to operate for 6 minutes.

After that time, the appliance returns to its

previous speed settings.

When the function is turned on, additional

touch on the button

any effects.

5.4 Filter notification

Filter alarm reminds to change or clean the

charcoal filter and clean the grease filter. The

6. CARE AND CLEANING

6.1 Notes on cleaning

Cleaning Agents

Keep the hood

clean

ENGLISH

, the Maximum

does not have

Do not use abrasive detergents and brushes.

Clean the surface of the appliance with a soft cloth with warm water and a mild detergent.

After cooking some parts of appliance can get hot. To avoid stains appliance must be

cooled down and dried with clean cloth or paper towels.

Clean stains with a mild detergent.

Clean the appliance and grease filters each month. Clean the interior and grease filters

carefully from fat. Fat accumulation or other residue may cause fire.

Follow the instructions for cleaning the accessories when filter notification is on. Refer to

Filter notification in daily use chapter.

Grease filters can be washed in a dishwasher.

The dishwasher must be set to a low temperature and a short cycle. The grease filter may

discolour, it has no influence on the performance of the appliance.

filter indicator

is turned on (red) for 30

seconds if the grease filter must be cleaned.

The filter indicator

seconds if the charcoal filter must be

replaced or cleaned.

Refer to cleaning the grease filter in care

and cleaning chapter.

Refer to cleaning the charcoal filter or

replacing the charcoal filter in care and

cleaning chapter.

To reset the function touch

To activate or deactivate function:

1. Switch on the control panel. Make sure

that the panel is on.

2. To activate function touch

seconds.

If the function is activated, the filter icon

flashes (red) five times.

3. To deactivate function touch

seconds.

If the function is deactivated, the filter icon

turns on (red) for 4 seconds.

flashes (red) for 30

for 3 seconds.

for 3