Kohler 1.1746.006 Installation And User Manual - Page 5

Browse online or download pdf Installation And User Manual for Bathroom Fixtures Kohler 1.1746.006. Kohler 1.1746.006 29 pages.

Print Page

22. DO NOT connect the outlet of the shower to any tap, control valve,

trigger operated handset or showerhead other than those specified

for use with this shower as the outlet acts as a vent for the tank

body. Only Kohler Mira recommended accessories should be used.

23. DO NOT perform any unspecified modifications, or drill or cut holes

in the product other than instructed by this guide. When servicing

only use genuine Kohler Mira replacement parts.

24. DO NOT connect this shower to a Waste Water Heat Recovery

System as this may cause unstable or scalding temperatures to

be delivered from the shower head.

25. Always check the water temperature is safe before entering the

shower.

26. The water supplies to this product must be isolated if the product is

not to be used for a long period of time. If the product or pipework

is at risk of freezing during this period they should also be drained

of water.

27. If the shower is dismantled during installation or servicing then,

upon completion, an inspection must be made to ensure all

electrical connections are tight and that there are no leaks.

28. This appliance is intended to be permanently connected to the

water mains and not connected by a hose set.

29. The water inlet of this appliance shall not be connected to a water

supply obtained from any other water heating system.

30. Warning! This appliance is not to be used to provide a potable

water supply.

31. Maximum Static Pressure is 1000 kPa (10 bar).

32. Minimum Dynamic Pressure is 70 kPa (0.7 bar) 9.0 kW and

9.8 kW.

1494247-W2-A