Kohler Elosis K-18055T-B-CP Installation Instructions Manual - Page 9
Browse online or download pdf Installation Instructions Manual for Bathroom Fixtures Kohler Elosis K-18055T-B-CP. Kohler Elosis K-18055T-B-CP 12 pages. Sensor faucet
Print Page
如何转换成恒温阀感应龙头
(若用户另购恒温阀16294T-3-CP,
具体安装详见其说明书)
注：三通、角阀请用户自备。
安装结果检查
检查并确保所有衔接处都已拧紧，打开排水系统
和主要供水源，检查并修理有漏水的接口。
清理说明
适用于所有加工处理过的表面，以中性肥皂水清
洗镀层表面，再以干净的软布彻底擦干整个表
面。许多清洁剂，比如氨水，去污粉及洁厕灵
等，会对电镀表面造成伤害，切忌使用。
有腐蚀性的清洁剂或溶剂不可使用于科勒的水龙
头及其配件上。
用户须知
1. 感应指示灯的各种闪烁情况
感应指示灯是使用者了解感应龙头有效、唯一
的途径。所以明白了感应指示灯闪烁所代表的
含义，可以正确使用感应龙头，
1248536-T01-C
角阀
Stop Valve
三通
Tee
进热水
hot
恒温阀
thermostatic valve
HOW TO CHANGE TO THERMOSTATIC
SENSOR FAUCET (If users purchased the
thermostatic valve 16294T-3-CP, please refer to
the installation guide 16294T-3-CP)
三通
Tee
出水口
Outlet
进冷水
cold
Note: Please prepare the tee and stop valve accordingly.
INSTALLATION CHECKOUT
Check and ensure that all connections are tight. Open the
drain. Turn on main water supply and check for leaks.
Repair leakage when necessary.
CLEANING INSTRUCTIONS
Appliable for all finishes: clean the finish with a mild soap.
Wipe entire surface completely dry with a clean soft cloth.
Most cleaners may contain chemicals, such as ammonia,
chlorine, toilet cleaner etc. which could adversely affect the
finish and are not recommended for cleaning. Do not use
abrasive cleaners or solvents on Kohler faucets and
fittings.
IMPORTANT CONSUMER INFORMATION
1. Different Indicator Flashing Indication
The indicator is the only and effective way to learn the
faucets working conditions. So the users can use the
sensor faucet correctly with knowing the meaning of the
sensor indicator's flashing.
接感应龙头
Connect Sensor Faucet
角阀
墙面
Stop Valve
Wall
三通
Tee
墙面
Wall
MIN 50mm
9