AEG 916 098 769 User Manual - Page 20
Browse online or download pdf User Manual for Dryer AEG 916 098 769. AEG 916 098 769 32 pages.
Print Page
20
www.aeg.com
10.3 Deactivating the tank
indicator
The water container indicator is activated
by default. It illuminates at the end of the
drying cycle or during the cycle if the
water reservoir is full. If the draining kit is
installed the water container is drained
automatically and the indicator can be
deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Wait approximately 8 seconds.
3. Select 1 of the available
programmes.
11. CARE AND CLEANING
11.1 Cleaning the filter
At the end of each cycle the
symbol comes on the display and you
must clean the filter.
The filter collects the lint
during the drying cycle.
To achieve the best drying
performances clean the filter
regularly , clogged filter lead
to longer cycles and energy
consumption increase.
Use your hand to clean the
filter , and if necessary , a
vacuum cleaner .
CAUTION!
Avoid the use of water to
clean the filter. Instead throw
away lint in the dustbin
( avoid dispersion of plastic
fiber in water ambient).
1. Open the door. Pull the filter up.
4. Touch and hold down Time Dry and
Delay Start buttons at the same
time.
One of 2 configurations is possible:
• the Tank indicator:
• the Tank indicator:
2. Push the hook to open the filter.
Filter
3. Gather lint with hand from both
internal parts of the filter.
symbol
appears - the
water container indicator is
permanently activated
symbol
appears - the
water container indicator is
permanently deactivated
is on if the
is off if the