AEG LAVATHERM 56740 User Manual - Page 14

Browse online or download pdf User Manual for Dryer AEG LAVATHERM 56740. AEG LAVATHERM 56740 32 pages. Aeg condenser dryer user manual

Print Page

Daily use

Starting the programme

Press the START PAUSE button. Led above stops

flashing, becomes steady. The programme is star-

ted. Display shows elapsing cycle time or delay

time if activated.

To change a programme which has been selected by mistake once the programme has

started, first turn the programme selector to OFF and then reset the programme.

The programme can no longer be changed directly once the programme has started. If

nevertheless there is an attempt to change the programme on the programme knob, the

programme progress display and the maintenance indicators flash. If an option button

(excluding the BUZZER button) is pressed, Err appears in the multidisplay. The drying pro-

gramme is not however affected by this (laundry protection).

1. Open loading door.

WARNING!

Laundry and drum can become hot. Risk of burns!

2. Load or remove laundry items.

3. Close loading securely. Lock must audibly lock.

4. Press the START PAUSE button to continue the drying cycle.

Once the drying cycle is complete, display shows a blinking "0". If the BUZZER button has

been pressed, an acoustic signal sounds intermittently for about one minute.

The drying cycles are automatically followed by an anti-crease phase which lasts around

30 minutes. The drum rotates at intervals during this phase. This keeps the laundry loose

and free of creases. The laundry can be removed at any time during the anti-crease phase.

(The laundry should be taken out towards the end of the anti-crease phase at the latest to

prevent creases from forming.) If LONG ANTI-CREASE function has been selected, the anti-

crease phase is lengthened by 60 minutes.

1. Open door.

2. Before removing the laundry, remove fluff from the micro-fine filter. It is best to use

a damp hand for this purpose. (See "Care and cleaning" chapter.)

3. Remove laundry.

4. Turn the programme selector to OFF.

After each drying cycle: