AEG LAVATHERM 57810 User Information - Page 23
Browse online or download pdf User Information for Dryer AEG LAVATHERM 57810. AEG LAVATHERM 57810 32 pages. Condensation dryer
Also for AEG LAVATHERM 57810: User Information (32 pages)
Print Page
Programming options
Objective
Permanently program in
the audible signal which
reminds you that the
programme is complete.
Adjust detection of de-
gree of drying:
If the laundry is slightly
drier or slightly damper
at the end of the pro-
gramme than with the
standard setting.
If the EMPTY WATER
(RESERVOIR) display is to
remain permanently de-
activated when using an
external condensate
drain.
Implementation
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL (ZOEMER) button and hold
down for approx. 5 seconds.
A brief signal sounds several times. The AUDIBLE SIGNAL
(ZOEMER) display flashes several times.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL (ZOEMER) and SENSITIVE
(BEHOEDZAAM) buttons at the same time and hold
down for approx. 5 seconds.
The current setting appears on the multi-display:
– C0: Setting for drier laundry
– C1: Standard setting
– C2: Setting for damper laundry
3. Press the START/PAUSE (START/PAUZE) button until the
setting required appears on the multi-display.
4. Turn the programme selector to OFF (UIT).
The setting is permanently programmed.
1. Turn the programme selector to any programme.
2. Press the DOOR (DEUR) and SPECIAL CARE (LAGE TEMP.)
buttons at the same time and hold down for approx. 5
seconds. The multi-display briefly displays "0"
The EMPTY WATER (RESERVOIR) display is permanently
deactivated.
The setting is cancelled as described under 1 and 2; the
multi-display however briefly displays "1" (rather than
"0").
23