AEG LAVATHERM 8040 TW ELECTRONIC User Information - Page 15

Browse online or download pdf User Information for Dryer AEG LAVATHERM 8040 TW ELECTRONIC. AEG LAVATHERM 8040 TW ELECTRONIC 32 pages. Condenser dryer with heat pump

Print Page

1. Cleaning and Maintenance

Putting in extra items or taking items out before end of

programme

1. Open door.

Warning! Laundry and drum can become hot. Risk of burns!

2. Load or remove laundry items.

3. Close door securely.

4. Press the START/PAUSE button to continue the drying cycle.

Drying cycle complete / removing laundry

Once the drying cycle is complete, the END (ENDE) and CREASE GUARD

(KNITTERSCHUTZ) displays light up. If the AUDIBLE SIGNAL (SIGNAL)

button has been pressed, an audible signal sounds intermittently.

The drying cycles (except for the WOOL programme) are automatically

followed by a crease guard phase which lasts around 30 minutes. The

drum rotates in intervals during this phase. The laundry thereby re-

mains relaxed and free of creases. The laundry can be removed at any

time during the crease guard phase. (The laundry should be taken out

towards the end of the crease guard phase at the latest to prevent

creases from forming.)

If LONG ANTICREASE (KNITTERSCHUTZ +) has been selected, the anti-

crease phase is lengthened by 60 minutes.

1. Open loading door

2. Before removing the laundry, remove lint from the micro-fine filter. It is

best to use a damp hand for this purpose (refer to "Cleaning and main-

tenance" section).

3. Remove laundry.

4. Turn the programme selector to OFF (AUS).

Important! After each drying cycle

– clean the micro-fine filter and fine strainer,

– drain the condensate tank

(refer to the "Cleaning and maintenance" section).

5. Close loading door.