AEG LAVATHERM T97689IH User Manual - Page 19
Browse online or download pdf User Manual for Dryer AEG LAVATHERM T97689IH. AEG LAVATHERM T97689IH 29 pages.
Print Page
11. HINTS AND TIPS
11.1 Ecological hints
• Spin good the laundry before drying.
• Use the load volumes which are
specified in the programme chart.
• Clean the filter after each drying
cycle.
• Do not use fabric softener to wash
and then dry. In the tumble dryer
laundry becomes soft automatically.
• Use the condensate as distilled water,
e.g. for steam ironing. If it is necessary
clean the condensate before (e.g.
with a coffee filter) to remove possible
small pieces of fluff.
• Always keep the airflow slots on the
bottom of the appliance clear.
• Make sure that is good airflow in the
appliance installation position.
11.2 Adjustment of the
remaining laundry moisture
degree
To change the default degree of the
remaining moisture of the laundry:
1. Turn on the appliance.
2. Wait approximately 8 seconds.
3. Select 1 of available programmes.
4. Touch at the same time and hold
down the Dry Plus and Spun at RPM
option fields.
One of the symbols goes into the view
on the display:
- the maximum dry laundry
- the more dry laundry
- the standard dry laundry
5. Touch the Start/Pause field again
and again until you set necessary
degree.
6. To memorise the setting, touch at
the same time the Dry Plus and
Spun at RPM option fields for
approximately 2 seconds.
11.3 Deactivating the Tank
indicator
The water container indicator is by
default on. It starts to light at the end of
the drying cycle or during the cycle if the
water reservoir is full. If the draining kit is
installed the water container is drained
automatically and indicator can be
permanently off.
To deactivate the indicator:
1. Turn on the appliance.
2. Wait approximately 8 seconds.
3. Select 1 of available programmes.
4. Touch at the same time and hold
down the Dry Plus and Buzzer
option fields.
One of 2 configurations is possible:
• the Tank indicator:
the symbol
view - the water container
indicator is permanently on
• the Tank indicator:
the symbol
view - the water container
indicator is permanently off
11.4 Language
You can change the language each time
you want.
To set the different language:
1. Turn on the dryer.
2. Wait approximately 8 seconds.
3. Touch at the same time the Anti-
crease and Spun at RPM option
fields and hold down.
ENGLISH
19
is on and
goes into the
is off and
goes into the