AEG LAVTHTHERM Installation Instructions Manual - Page 7

Browse online or download pdf Installation Instructions Manual for Dryer AEG LAVTHTHERM. AEG LAVTHTHERM 10 pages. Aeg vented tumble dryer

Print Page

Venting

Venting through a Vent Hose

The vent hose expelling the hot air should be 100 mm diameter and no

longer than 4 meters. Avoid bends in the vent hose as this will reduce

the air flow. The maximum length of the vent hose may be:

4 meters with 0 bends, or

2 meters with 2 bends.

If the vent hose is to be permanently installed to the outside, a wall box

or suitable cover should be used on the outside wall.

Example:

A vent hose (Part number: 647 000 010) and wall box (Part number:

647 000 020) are available from your local AEG Service Force Centre.

Ensure the vent hose is not squashed. The drying efficiency of the

tumble dryer will be affected and may cause the safety cut outs to

operate.

Warning! The vent hose must not be connected to a flue pipe or

chimney designed to carry the exhaust from a fuel burning heating

appliance.