AEG TR939M4OBC User Manual - Page 18
Browse online or download pdf User Manual for Dryer AEG TR939M4OBC. AEG TR939M4OBC 36 pages.
18
www.aeg.com
7. OPTIONS
7.1 Nivel de Sec.
This option helps to achieve requested
laundry dryness. You can select the level
of dryness:
1) Default selection which is related to the pro‐
gramme
7.2 Tiempo/Tempo sec.
For: Algod., Ropa de Cama/Lençóis XL,
Sintéticos and MixDry programs. Lets the
user to set drying time from minimum 10
min to maximum of 2 hours (in 10 min
steps). When this option is maximum,
load indicator disappears.
The cycle lasts as long as
set drying time regardless of
the size of a load and its
dryness.
TIME DRYING RECOMMENDATION
up 10
action of cool air only (no heat‐
min
er).
additional drying to improve dry‐
10 - 40
ness after previous drying cy‐
min
cle.
full drying of the small laundry
> 40
loads up to 4 kg, well spun
min
(>1200 rpm).
Tiempo/Tempo sec. on
Lana/Lãs program
Option applicable to Lana/Lãs program
to adjust final dryness level to more dry
or less dry.
ready to iron - iron dry level
ready to store - cupboard
1)
dry level
ready to store - extra dry
level
7.3 Anti-arrugas/Rugas
Extends up to 120 minutes the anti-
crease phase (30 minutes) at the end of
the drying cycle. After drying phase drum
rotates from time to time to prevent
creases. Laundry can be removed during
the anti-crease phase.
7.4 Silencioso
The appliance operates with low noise
without effect on the drying quality. The
appliance operates slowly with longer
cycle time.
7.5 Alarm.
The acoustic signal sounds at the
following:
• cycle end
• start and end of crease guard phase
The acoustic signal is by default always
on. You can use this option to activate or
deactivate the sound.
7.6 Terminar en/em
This option allows choosing
the time at which a
programme should
terminate. Once activated
the machine waits for the
right moment to begin the
drying process.
Terminar en/em time is the sum of stand
by time and drying time.
To set the Terminar en/em option:
1. Set the drying programme and
options.
2. Touch Terminar en/em repeatedly
until the display shows the desired
time within the programme should
end (e.g.
has to finish within 12 hours.)
3. Touch the Inicio/Pausa button. The
drum starts rotating to perform the
ProSense estimation, if foreseen in
the selected programme.
4. The appliance starts the countdown
to the end of the programme and the
if the programme