Kohler K-1151 Installation Manual - Page 12

Browse online or download pdf Installation Manual for Bathtubs Kohler K-1151. Kohler K-1151 36 pages. Bath with airjets
Also for Kohler K-1151: Homeowner's Manual (29 pages), Homeowner's Manual (36 pages), Homeowner's Manual (32 pages), Installation Manual (48 pages), Homeowner's Manual (36 pages), Roughing-In Manual (4 pages), Installation Manual (48 pages), Homeowner's Manual (29 pages)

Print Page

Troubleshooting Procedure (cont.)

Symptoms

2. Motor starts, not all jets are

functioning.

Whirlpool stops automatically

before 18 minutes.

4. Noisy operation.

Heater does not operate. ("H"

models only)

1012295-2-D

Probable Causes

D. Motor/pump does not work.

A. Jet is closed.

B. Jets are blocked.

A. The GFCI or ELCB trips.

B. Suction blocked.

C. Jets are blocked.

D. Motor overheated and

protection device activated.

A. Pump banding straps have not

been cut. (Models with support

blocks only.)

A. No power to heater.

B. Water temperature exceeds

104° F (40° C).

C. Heater does not work.

Recommended Action

D. Rebuild or replace

motor/pump.

A. Rotate jet trim ring

counterclockwise to open.

B. Remove blockage.

A. Identify source of fault, and

correct.

B. Remove obstruction.

C. Remove blockage.

D. Check for blockage at motor

vents. Remove blockage and

allow motor to cool.

Check for suction blockage.

Remove blockage and allow

motor to cool.

Check for jet blockage. Remove

blockage and allow motor to

cool.

A. Cut pump banding straps with

tin snips.

A. Reset the GFCI or ELCB.

B. Allow water to cool and heater

will reengage.

C. Replace heater.

Kohler Co.