Kohler WELLWORTH K-7058T-S Installation Instructions Manual - Page 2
Browse online or download pdf Installation Instructions Manual for Toilets Kohler WELLWORTH K-7058T-S. Kohler WELLWORTH K-7058T-S 10 pages. 4.2l skirted two-piece toilet
Print Page
NOTES
·
Observe all local plumbing and building codes.
·
Shut off the water supply.
·
Seat post holes are on 140mm (5-1/2") centers.
·
Ensure that the new drain has the correct roughing-in
dimension. This toilet has a 305mm/400mm roughing-in
dimension.
See Roughing-in
·
4.2L water usage.
·
Closet flange must be 305mm/400mm on-center from wall.
·
Carefully inspect the new fixture for any sign of damage.
·
For new construction, refer to the dimensions in
installation step
for locating the shut-off valve.
·
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2008)
WARNING: Risk of personal injury or product
damage
: Handle vitreous china products very carefully.
Vitreous china can break and chip if you overtighten
bolts and nuts.
WARNING: Risk of external leakage
nut has been factory-tightened to design specifications.
If re-tightening is required, wrench tighten one turn
past finger tight .
TOOLS AND MATERIALS REQUIRED (Not
supplied)
·
254mm (10") adjustable wrench
·
305mm (12") pipe wrench
·
Metal file (file cut)
·
Tape measure
·
Tubing cutter
·
Level
·
Hacksaw
·
Putty knife
·
Screwdriver
·
Toilet gasket (wax seal)
·
Toilet installation flange
·
Toilet T-bolts (2), 8mm (5/16") diameter
·
Toilet supply shut-off valve
NOTICE:
If the existing toilet does not have a supply shut-off
valve below the tank, install one before installing the new
toilet.
1232940-T01-A
.
.
. The fill valve
·
·
·
140mm
·
305mm/400mm (
·
4.2L
·
·
·
·
2008
·
254mm
·
305mm
·
·
·
·
·
·
·
·
·
·
8mm T
·
-2-
)
305mm/400mm
ASME A112.19.2-
2