Kohler Command PRO CH26 Owner's Manual - Page 16
Browse online or download pdf Owner's Manual for Engine Kohler Command PRO CH26. Kohler Command PRO CH26 21 pages. Command series
Also for Kohler Command PRO CH26: Owner's Manual (21 pages), Owner's Manual (21 pages), Owner's Manual (21 pages), Owner's Manual (8 pages), Owner's Manual (14 pages)
![Kohler Command PRO CH26 Owner's Manual](/uploads/products/server2/2636898/2636898.jpg)
Storage
If the engine will be out of service for two months or
more, use the following storage procedure:
1.
2.
3.
4.
5.
Clean the exterior surfaces of the engine. On EFI
engines, avoid spraying water at the wiring
harness or any of the electrical components.
Change the oil and filter while the engine is still
warm from operation. See "Change Oil and Oil
Filter" on page 9.
The fuel system must be completely emptied, or
the gasoline must be treated with a stabilizer to
prevent deterioration. If you choose to use a
stabilizer, follow the manufacturers
recommendations, and add the correct amount for
the capacity of the fuel system. Fill the fuel tank
with clean, fresh gasoline. Run the engine for 2-3
minutes to get stabilized fuel into the rest of the
system. Close fuel shut-off valve when unit is
being stored or transported.
To empty the system, run the engine until the tank
and system are empty.
Remove the spark plugs. Add one tablespoon of
engine oil into each spark plug hole. Install the
plugs, but do not connect the plug leads. Crank
the engine two or three revolutions.
Store the engine in a clean, dry place.
Parts Ordering
The engine Specification, Model, and Serial Numbers
are required when ordering replacement parts from
your Kohler Engine Service Dealer. These numbers are
found on the identification plate which is affixed to the
engine shrouding. Include letter suffixes if there are
any. See "Engine Identification Numbers" on page 6.
Always insist on genuine Kohler parts. All genuine
Kohler parts meet strict standards for fit, reliability, and
performance.
Major Repair
Major repair information is available in Kohler Engine
Service Manuals. However, major repair generally
requires the attention of a trained mechanic and the
use of special tools and equipment. Your Kohler
Engine Service Dealer has the facilities, training, and
genuine Kohler replacement parts necessary to
perform this service. For Sales & Service assistance
call 1-800-544-2444
(U.S. &
Canada) or contact your
Kohler Engine Dealer or Service Distributor, they're in
the Yellow Pages under Engines-Gasoline.
Specifications
Model: .........................................................................
CH18,20,22
...........................................
CH25,26,730,740
Bore: ......................................
rnrn
(in.) ......................
77 (3.03)#
...............................................
83 (3.27)
Stroke: ....................................
rnrn
(in.) ......................
67 (2.64)
................................................
67 (2.64)
Displacement: ........................
cm3
(in3) ......................
624 (38.1)#
.............................................
725 (44.0)
Power (Q3600 RPM): ..........
kW
(HP) ......................
13.4 (18*)/14.9 (20*)/16.4 (22*)
............
18.4 (25*)/19.4 (26)
18.6 (25*)/20.1 (27)
Max.
Torque
( Q RPM):
......... N.rn
(ft. Ib.)
......................
41 (30) Q2500
........................................
54
(39.5) Q2200
44 (32) Q2500
........................................
56.4 (41.6) Q2200
45 (33) Q2500
........................................
52 (38) Q2800
54 (40) Q2800
Compression Ratio: ....................................................
8.51
......................................................
9.O:l
Weight: ....................................
kg (Ib.) ......................
41 (90)
...................................................
43 (94)
Oil Capacity (w/filter): ........
L (U.S.
qt.) ......................
2 (2.1)
....................................................
2 (2.1)
Lubrication: ..........................................
.
.
Full Pressure w/full Flow Filter
Exhaust Emission Control System
for
models
CH18,20,22,23,25,730,740
is EM.
Exhaust Emission Control System
for
model
CH26
is
EM, 02S,
ECM, MFI.
*Horsepower ratings are established in accordance with Society
of
Automotive Engineers
-
Small Engine
Test
Code
4 1 995
GROSS.
Kohler Co. reserves the right
to
change product specifications, design, and standard equipment without notice and
without incurring obligation.
#CH22 or CH23
engines with Spec. Numbers
of 765xx
have bore size
of 80 rnrn (3.15
in.) and displacement
of 674 cm3
(41.1
in3).
16