A-Safe RackEye User's Product Manual - Page 3
Browse online or download pdf User's Product Manual for Accessories A-Safe RackEye. A-Safe RackEye 13 pages.
2. Technical Specification - RackEye
Colour
Height
Dimensions
Width
Depth
Mass (Weight)
Bluetooth Version
Frequency
Activity
Connection to
Smart-phone
Transmission Power
Range
Class
DECT ULE
Frequency
Connection to
Gateway
Transmission Power
Device Check-in Frequency
Range
Status
10 x LEDs
Indication
Temperature
Operating
Conditions
Humidity
Max.
Installation
Height***
Min.
Power Source
Power
Runtime
* Range will depend on variables such as building construction and items being stored.
** Based on a RackEye™ running normally at room temperature with no alerts over a two year period.
*** Note these are recommended for optimum sensing. Custom heights can be investigated if you have a specific
requirement.
04
ª
Yellow / Black
190mm / 7.48in
44mm / 1.73in
35mm / 1.38in
0.193g / 6.80Oz
4.2
2.4GHz
During Setup & Reset
0dBm
<3 Metres / <10ft
3
(Digital Enhanced Cordless
Telecommunications) (Ultra Low Energy)
EU
1.88 to 1.9 GHz
USA & Canada
1.92 to 1.93 GHz
23.5dBm
30mins (Default) adjustment possible
100m to 200m*
Alarm
Red
Tamper
Amber/ Red
Low Battery
Amber
OK
Green - Can be turned off
Low
-20 Celsius / -4 Fahrenheit
High
40 Celsius / 104 Fahrenheit
Low
20%
High
80%
2200mm
1800mm
2X AA Batteries
2 Years**
3. Regulatory and Compliance Information
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
FCC warning statement:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
End users must follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment
www.asafe.com
05