Kohler CLW Series Instructions - Page 4

Browse online or download pdf Instructions for Indoor Furnishing Kohler CLW Series. Kohler CLW Series 4 pages. Cabinet

Print Page

5. INSTALLING THE TOOTHBRUSH COVERS & DOOR BUMPERS – see Fig. 9

1. Install the clear door bumpers in the round indent

area at the top and bottom of the door.

6. INSTALLING THE SHELVES – see Fig. 10

1. Push/twist the pins

into place

A. Push one side of

the shelf into the

left or right clips

B. Snap the shelf

down into the

opposite side. If

the shelf is too

tight, repeat the

process from the

other side.

2. Fill the remaining

holes with the plugs.

Parts supplied with your cabinet.

Be sure to check the cardoard supports in the carton, glass parts are packed in them.

number.)

4 Side Kits brackets

CB-BAGCLCS (Sliver) or

CB-BAGCLCW (White)

2 Glass Shelves

(CB-SHLFCLC15 &

CB-SHLFCLC20)

Side

Mirrors

11" Mounting Bar

(CB-RO331100M)

Checklist • Care & Maintenance

1. Cleaning

A. The cabinet door and interior are constructed of mirror and

aluminum. Use only a damp cloth to clean. Spray the cloth,

not the mirror when cleaning. Mirrors are damaged by the use

of ammonia or vinegar based cleaners. Rubbing alcohol can

be used for stubborn stains.

B. Use no abrasive cleansers on any part of the cabinet.

C. The white frame should be cleaned with a damp cloth only.

1070225-2-A

(For cabinet body and door replacement, call customer service with model

1 BC-BAGCLCHGE

Hinge Kit

Fig. 9

Fig. 10

Part List

- BAGCLCS (silver) BAGCLCW (white)

#8" X 3/8" Screws

Snap-in Pins

Door Bumpers

#8 X 2" Hex Head Slotted

Screws

4 Side Kits Bracket

Foam tape

Door

Bumper

Top Clips

Screw Caps

Silver or

White

#8 X 1/2" Phillips

Head Screws

Wall Anchors

Hole plugs

White or

Silver