Kohler Englefield VALENCIA Installation Instructions Manual - Page 5
Browse online or download pdf Installation Instructions Manual for Indoor Furnishing Kohler Englefield VALENCIA. Kohler Englefield VALENCIA 7 pages. Double drawer vanity
Also for Kohler Englefield VALENCIA: Installation Instructions Manual (7 pages)
Print Page
®
VALENCIA
/ VALENCIA ELITE
NOTE: Screws should be positioned evenly
and fixed into nogs or studs.
50mm
50mm
100mm
Mounting brackets screw positioning
4 Fixing the vanity to the wall
(e) Fix the cabinet to the wall using at least
6 screws for the 750mm & 900 mm cabinets
and 8 screws for the 1200 cabinets (min 10g
x 75 mm) and * 20 mm washers.
Screw through the back wall so that they
screw into the nog and stud(s) in the wall
behind.
* Washers must be used to spread the load.
1278274-A02-D September 2023
®
Double Drawer Vanity
100mm
50mm
100mm
Mounting
bracket
50
50
5 Vanity top
(a) Unpack the top and check for any damage
that might have occurred in transit.
50mm
Check and confirm the fit of your selected
tapware.
(b) Apply a continuous bead of silicone (not
supplied) to the top edge of the cabinet sides
and back. Ensure there are no gaps in the
sealant bead. This will ensure the top stays
securely fitted to the cabinet and no water
spillage will find its way into the cabinet.
No silicone on
front edge
(c) Place the vanity top onto the cabinet
ensuring that the back is flush against the
wall and there is an even overhang on either
side of the cabinet.
=
(d) Wipe off any excess silicone sealant.
6 Waste and tapware
(a) Fit the waste and tapware. Connect the
water supply to the taps and waste pipe to
the waste outlet.
(b) Run hot and cold water and check for
leaks.
When satisfied with the results move on to
the next section.
Page5
INSTALLATION INSTRUCTIONS
englefield.co.nz
=