Kohler PERSUADE K-2527T Installation Instructions Manual - Page 3

Browse online or download pdf Installation Instructions Manual for Indoor Furnishing Kohler PERSUADE K-2527T. Kohler PERSUADE K-2527T 6 pages. Vanity cabinet

Print Page

INSTALLATION

A. Install the Plumbing and Accessories

Install the services.

Hot (H) and Cold (C) inlets must be connected to the correct

inlet pipes.

Install the drain in accordance with the manufacturer s

instructions.

We suggest using P-trap drain. Connect P-trap pipe with

washbasin drain.

Caution!

Make sure a watertight seal exisits on all

washbasin drain connections.

Caution!

Provide access to the plumbing connections

for future plumbing maintenance.

Note!

The hot and cold water supplies must be installed with

isolating valves.

B. Install the Vanity

Lift and place the vanity in position against the finished

wall, as shown.

Do not drag the vanity in position.

Verify the vanity is level and plumb. If necessary, turn each

leveler (clockwise to raise, counterclockwise to lower).

Drill pilot holes through the rear rail, finished wall, and into

the backing material. Insert lag bolts into the holes, then

tighten the lag bolts.

Caution!

Avoid the cables and

pipes inner set when drilling in

the wall.

Note:

Different types of bolts are

required for different decoration boards.

Please apply suitable bolts and plugs.

1158040-T01-A

(H)

(C)

-3-