Kohler VERDERA K-26379T-L Installation Instructions - Page 4
Browse online or download pdf Installation Instructions for Indoor Furnishing Kohler VERDERA K-26379T-L. Kohler VERDERA K-26379T-L 4 pages. Mirrored cabinet
Print Page
Power line connection
STEP1: Wiring.
安装步骤一：接线。
Installed Cabinet / 拼柜安装
K-26382T can be installed by cabinet splicing. Add additional
connectors on the basis of the mounting bar and the top
clips. (86mm for models with light, 46mm for models without
light)
K-26382T 可拼柜安装， 在托条与顶扣基础上增加连接件 （带灯
款用 86mm， 不带灯款用 46mm）
Connectors
连接件
USER MAINTENANCE
Warning! Risk of product damage.
The bathroom shall be kept in good ventilation. Clean the
cabinet with water and soft cloth. Do not use detergent
containing abrasive and chemical substance.
1421038-T01-A
Wire Input
外部电源线输入
220V/50Hz
The lighting and defogger can be turned
On/Off with the inductive switch at the
lower-left corner of the mirror cabinet.
灯具和防雾膜可通过镜柜左下角的感应开关
实现开关。
Switch
开关
电源线接入
STEP2: Fix top cover.
安装步骤二：固定顶盖 。
Wiring Terminal
Pull the orange handle until it is locked.
Insert the wire and restore the handle.
接线端子
扳动橙色操作手柄，直至其处于竖直锁
定位置，将导线插入，随后将手柄扳回
原位，接线完成。
Adjust magnifying glass / 调整放大镜
To adjust mirror height, slide up or down.
IMPORTANT! Rotate mirror in before closing the door.
上下滑动， 以调节镜子高度。
重要：必须在柜门关闭前旋入镜子。
The mirror can be removed.
放大镜可以拆卸。
Direction
方向
日常维护
警告！ 小心产品受损。
卫生间尽量保持空气畅通， 镜柜只能使用蘸有清水的湿布擦拭，
勿使用含研磨剂及化学物质的清洁剂。
-4-
Press the button to easily
move mirror up or down
按住此按钮可轻松上下移动
放大镜组件