2Power 2P 600l Installation Instructions Manual - Page 2

Browse online or download pdf Installation Instructions Manual for Water Heater 2Power 2P 600l. 2Power 2P 600l 8 pages. Storage tank

Print Page

1. General

Pay attention to the following symbol for important relevant information.

1.1. Working principle/ description of the device

The device combines a hygienic heating of water and a multivalent stratified storage for the

storing of solar heat as well as heat from other heating systems like heat pumps, biomass- or

pellet boilers. The drinking water is heated in a continuous flow by a stainless steel smooth

pipe heat exchanger. The volume of the storage serves as an energy storage for the heating

of the drinking water as well as the operation of the heating and is additionally heated by

solarthermal energy through a heat exchanger of copper fins

The sleeve patterns and numbers, as well as the pipe registers and the solar heat exchanger

allow a multivalent operation. Also, the storage provides the possibility of a continuous sensor

strip at any level of the storage to sense the temperature. The associated thermal insulation

of the storage protects the tank against heat loss.

1.2. Intended use

The described 2Power storage tank is provided for the storing of heating water and the

heating of the drinking water. Any use which goes beyond these limits is not regarded as the

intended use. The intended use also includes the observance of this instruction as well as the

instrunctions of the used supplies.

With changing or reconstructing the tank the guaranty expires.

2. Safety

Please follow these safety notes strictly to exclude danger and damages to people and

material assets.

For more clarity, symbols and warning signs are attached to the listed notes in this installation

instruction. These symbols and warnings will help to ensure your personal safety, the safety

of third parties and to avoid property damage.

Also follow the safety instructions of all other components that are installed in the heating

system.

InstAnl.V08-2014-0

Severe personal injury or substantial property damage can occur

If proper precautions are not taken.

At outlet temperatures of more than 43 ° C there is a risk of scalding.

Pagina 2 ǀ 8