AQC MAXIREACH EBD-60302 Owner's Manual - Page 10

Browse online or download pdf Owner's Manual for Industrial Equipment AQC MAXIREACH EBD-60302. AQC MAXIREACH EBD-60302 16 pages. Pivoting extension boom

Print Page

9.2.1

Assembly (first pivot)

3. Once the boom base is secured to support structure,

align horizontal steel tube (#7) to pivot joint (#3)

boom base pivot support bracket. Remove friction

disks (#10) and steel pin (#13) from boom base pivot

bracket.

4. Slide horizontal steel tube pivot section into boom

base pivot bracket. NOTE: Do not attempt to remove

pivot bushings (# 12) from pivot joint.

5. Insert one (1) friction disk (#10) over the pivot

section and one (1) under the pivot section. Insert

steel pressure plate (#9) over the top friction disk,

sandwiched between the friction disk and the boom

base top of pivot bracket.

6 . Using a spike, align holes of friction disks and pressure

plate to pivot assembly, ready for steel pin insertion.

NOTE: Ensure pressure plate grooves are aligned with

holes on top part of pivot boom base support section.

7. Remove cotter pin from steel pin (#13). Insert steel

pin from underneath boom base pivot support

bracket until completely through. Secure with cotter

pin.

8. Temporarily secure the steel pressure plate by slightly

screwing the (2) screws (#29) into steel pressure plate

grooves.

9. Remove last nut and washer from threaded end of

pull rod. Insert pull rod threaded section into pull

rod horizontal support bracket (#9a) about 12"

(30 cms) into the bracket.

Pivoting Extension Boom

17/425

9/229

12.2/305

11/279