A-TOUCH W-Thermo Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Thermostat A-TOUCH W-Thermo. A-TOUCH W-Thermo 15 pages.

Print Page

If for example the LOCAL unit controls a radiating floor, the HEATER UNIT should be

LOCAL if you wish to heat only with it. You can choose to heat with the air

conditioning if you select REMOTE or even BOTH if you want both to heat at the

same time.

The same applies for the COOLING UNIT. In our example, cooling would be made

with the air conditioning. Therefore the COOLING UNIT should be set to REMOTE.

This setting can be changed any time you like.

If for example you have no cooling unit, then set it to NONE: the thermostat will

not operate in Summer mode.

Puting temporarily both units operating together can be made without setting the

HEATER or COOLER units to BOTH: just hold the key

operation that the second unit will switch on together with the first. Please see the

chapter USING 2 UNITS WITH 1 THERMOSTAT for more details.

This is how you select the HEATER and COOLER units:

SELECT UNIT

HEATER

SELECT UNIT

LOCAL

SELECT UNIT

REMOTE

SELECT UNIT

COOLER

SELECT

UNIT TYP

UNIT TYPE

The thermostat must be configured for the climatization unit it is connected to

because the operation is different for several types of climatization units. You can

choose the following unit types:

RADIATOR

R. FLOOR

AIRFLOW2

AIRFLOW4

AIR CON1

DAIKINFD

AIR CON2

To select the right unit type proceed as follows:

SELECT

UNIT TYP

RADIATOR

AIR-CON1

16:30

Notes:

[email protected]

Press key

(ENTER):

- the display shows the actual unit.

Change with key

(UP) or

Confirm by pressing key

Proceed the same way for the COOLER unit.

When you confirm with key

menu item.

usually wall or floor mounted radiators with water, operation with

on/off of valve

radiating floor with water, proportional operation

air flow unit with 2 tubes, on/off of valve and 3 ventilation speeds

air flow unit with 4 tubes, on/off of heat and cool valves and 2

ventilation speeds with automatic change between Winter and

Summer operation

air conditioning, on/off of compressor and 3 ventilation speeds

DAIKIN air conditioning of series FDX equipped with interface board

KRP413A

air conditioning, on/off of compressor and 3 ventilation speeds but

with delay of 3 minutes to start the compressor

Press key

(ENTER):

- the display shows the actual unit.

Change with key

(UP) or

Confirm by pressing key

- the display shows the time and extis the menu. Remember, the

unit is OFF if the display shows time.

(VENT) on the normal

(DOWN)

(ENTER):

(ENTER) the display will show the next

(DOWN)

(ENTER):