AQTRONIC SF53 Operation Manual - Page 2

Browse online or download pdf Operation Manual for Controller AQTRONIC SF53. AQTRONIC SF53 5 pages.

Print Page

SF53

CNC PLASMA Torch Height Controller

Terminal details:

Direct 1:1 plasma cutters

ATTENTION:When connecting directly, use the

shortest possible cables for connecting the plasma

source with THC controller - it is recommended the

THC controller to be located directly at the plasma

source.

1:1 Plasma Ratio input:

While being a universal THC, accepting full raw arc

voltage for most any plasma cutter on the market, an

exciting new standard feature of this unit is the ad-

dition of a 1:50 divider for an extremely fast, simple

installation on most major brands. There will most

likely be a direct connection for this on the outside of

the plasma cutter's unit. Please refer to your plasma

cutter owner's manual.

An example of how to connect the THC controller's

measurement input withthe output of the very

popular Hypertherm Powermax45 ®- The THC

comesstandard equipped with a low voltage output of

1:50 divider. This ratio is the most commonly used

division in most major brands and there will most like-

ly be a plug for this connection on the outside of the

cutter's unit.

http://www.aqtronic.com

Hypertherm Powemax45 1:50 DV