Dexin MWP83-P1M User Manual - Page 5

Browse online or download pdf User Manual for Mouse Dexin MWP83-P1M. Dexin MWP83-P1M 10 pages. Cordless mouse

Print Page

connect button on the mouse. The LED will start blinking, when the

connection is established.

Move the mouse around to test if it was successful.

5. If the synchronization is not successful for some reason please

Remove the batteries and unplug the receivers

Wait for 20 sec then to try the step 1 to 4 again

Note: * During normal use, please make sure that the mouse is no more than 3 ft

away from the receiver in order to have reliable connection.

** The LED on the receiver will light up or blink while the mouse is being used

Operation Guide

BATTERY LOW INDICATION

When battery voltage level goes under the preset level, the LEDs indicator on the

mouse wheel cover and the receiver will blink frequency. Although the mouse can

still work for a while, the user, at this time, should have a new set of batteries ready for

replacement as soon as possible.

POWER ON/OFF MOUSE

MWP83-P1M designed 2 methods for power saving, you can power ON/OFF by A

or B.

A. By sliding the ON/ OFF switch on the bottom.

B. The patent of ID power ON/OFF function, as following:

Power OFF the mouse

Be sure the mouse is NOT in sleep mode. If it is, press any key to wake it up.

Press and hold the Connect button on the bottom of the mouse for more than 2

seconds.

The red light will flash the go off.

MWP83-P1M Cordless Mouse

Page 5 of 10

1.0 Edition