Aqua Blaster FE100 Manual - Page 6

Browse online or download pdf Manual for Firefighting Equipment Aqua Blaster FE100. Aqua Blaster FE100 6 pages.

Print Page

The following warranty is the only warranty applicable to Custom Elite Mfg., LLC

(CEM) products, and to the maximum extent permitted by law, overrides any

other conditions or warranties expressed or implied on CEM products. Other than

legislative obligations to the contrary, CEM will not be liable for any incidental

or consequential damages arising from the ownership or use of a Product. No

person, including any dealer or representative of CEM is authorized to make any

representation or warranty on behalf of CEM inconsistent with these provisions.

Purchasers to whom these provisions apply agree to hold CEM not liable for claims

by their customers in excess of the obligations of CEM expressly set forth herein.

THE WARRANTY: All products sold by CEM are guaranteed to be free from defects

in materials, workmanship or manufacture for a period of 12 months from the

initial date of purchase, excepting the following exclusions. Any parts/products

found by CEM to be defective, either in material or workmanship will be replaced

or repaired within this period, at no cost to the initial purchaser if the following

conditions are met:

•

The item has been operated in accordance with all instructions and warnings

provided.

•

Item is still owned and operated by original purchaser - proof of purchase is

required to obtain warranty.

ABUSE: Failure as a result of neglect, such as improper operation, or lack of

maintenance or continued operation after discovery of a defect that leads to

further damage.

ALTERATIONS: Any alteration, modification, attachments, use of non-genuine

parts or unauthorized repair to equipment.

DAMAGE: Damages or machine/component failure caused by carelessness/

recklessness or accidental damage, improper operation, or, inappropriate storage

or transportation.

ENVIRONMENTAL CONDITIONS & APPLICATIONS: Deteriorated or failed

components such as O-rings, diaphragms, hoses, seals and connections

damaged by corrosive chemicals, dirt and sand, excessive heat, moisture or other

environmental impacts. Warranty determination on these types of failures will be

made by CEM, only after inspection of the failed component.

INABILITY / UNSUITABILITY: In no event shall CEM be liable to any person for

indirect or consequential damages or for injury or commercial loss resulting from

any use or inability to use any CEM product.

MAINTENANCE:

services. Failure to tighten or replace loose or missing bolts, nuts, And fittings.

1/1/2020

Component failure due to failure to perform maintenance