AvL Technologies Romantis Setup And Reference Manual - Page 6

Browse online or download pdf Setup And Reference Manual for Modem AvL Technologies Romantis. AvL Technologies Romantis 12 pages. Modem/router

Print Page

Romantis Modem / Router

Romantis Modem

Figure 3 – Ethernet Setup

Note: Be sure to connect the power to each device. The AAQ Controller should connect to the port

labeled AAQ on back CIP. Romantis Modem should connect to one of the LAN ports on back of CIP.

The modem/router has a static IP Address, in this example the static IP address of the modem/router

is 10.20.20.26. Therefore, communication must be on the 10.20.20.XXX network. These IP addresses

will vary depending on the customer network. The Subnet can be set to 255.255.255.0 to give the

modem/router the widest possible range of IP addresses to assign to other devices while the

Gateway must be set to 192.168.129.1 if the CIP is configured as a router. See the CIP appendix

(Appendix B) for more information

Figure 4 – Advanced Network Settings