AvL Technologies Romantis Setup And Reference Manual - Page 9

Browse online or download pdf Setup And Reference Manual for Modem AvL Technologies Romantis. AvL Technologies Romantis 12 pages. Modem/router

Print Page

4. Operation

4.1. Functional Overview

When properly configured, the Romantis modem is fully integrated into the AvL AAQ's acquisition
process, and can be used as a signal source to acquire and track on satellite signals. Once the target
satellite has been found, the modem will log into the network and be ready to send traffic.

4.1.1. Acquisition Process

1.
Power up the antenna
2.
Command the antenna to acquire
The AAQ will Home and initialize its sensors, it will read the compass, and then proceed to
the first initial scan point
3.
The antenna detects a lock from the modem and stops
The Modem has detected the satellite carrier
The AAQ has stopped its scan
4.
The AAQ will coarse peak back to the signal
This is the initial coarse peak that will move through the entire beam
5.
Once coarse peaking has been completed, fine peaking will begin
This fine peaks the signal using small slow movements
6.
AAQ will stop movement
The AAQ has enabled transmit on the modem
The Modem will log into the network and be ready to send traffic

4.2. Sensor Outputs

Path
Main Window → View→ Sensor Output
Level 0
Once the Sensor Output window is available, enter "Romantis" in the search box. Check the boxes
beside any Sensor Outputs you wish to view for monitoring operations.
Romantis Modem / Router
8