Aqua Computer Aquaduct 240 eco Operating And Assembly Manual - Page 14

Browse online or download pdf Operating And Assembly Manual for Computer Hardware Aqua Computer Aquaduct 240 eco. Aqua Computer Aquaduct 240 eco 20 pages. Aquaduct eco series

Print Page

AQUADUCT ECO

7. 7. 7. 7. Installation

Installation of the

Installation

Install the circuit board in a free slot of

your case. The slot does not have to

have any connection on the mother-

board.

The two holes in the bracket are

equipped with rubber protectors for safe

lead-through of the coolant hoses.

7.1. Connector „power"

Please connect a HDD power plug of

your PSU to this connector. Do not use

excessive force but double check the po-

larity of the plug if having trouble to con-

nect.

7.2. Connector„pump rpm signal" (not

for aquaduct 240 eco mark II AC 230 V)

This connector supplies a artificial rpm

signal that is generated by the con-

trolling unit of the aquaduct. This rpm

signal can for instance be configured to be switched off in case of an

alarm and thereby can be used for status monitoring of the aquaduct. If

connected to a fan connector of the motherboard, depending on BIOS

functionality and configuration, an alarm power-off can be realised. For

details on BIOS configuration, please consult the manual for your

motherboard,

7.3. Connector „flow" (aquaduct 360 eco+ mark II only)

Usable for connecting an optional flow sensor. Do only use aqua com-

puter sensors and cables!

Pin assignment Pin 1: GND

Pin 2: 5 V

- 14 -

of the PC interface circuit board

of the

PC interface circuit board

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1, 37130 Gleichen