AAVIX AGT310 Owner's Manual - Page 4

Browse online or download pdf Owner's Manual for Metal Detector AAVIX AGT310. AAVIX AGT310 17 pages. 2x9v smart metal detector

Print Page
upright with the detector in your hand, and the search coil is
level with the ground with your arm relaxed at your side.
Then counter-clockwise rotate to tighten the lock nut.
4. Wind the search coil cable around the stem. Insert the
search coil's plug into the search coil jack on the detector's
control housing.
Caution:
Do not over-tighten the search coil or use tools such as pliers
to tighten it.
The search coil's plug fits into the connector only in one way.
Do not force the plug and also do not pull on the cable or
you could damage it.
5. Stand and stretch your arm, holding the metal detector to
make the search coil above the ground for about 0.4~2inch.
Rotate the stem's lock nut counterclockwise to tighten it.

INSTALLING THE BATTERIES

Your metal detector is powered by two 9V batteries (not
included).
1. Turn off the power before installing the batteries.
2. Slide the left and right battery covers off in the direction of
the arrow.
3. Place a 9V battery into the battery compartment matching
the polarity symbols (+ and -) marked inside.
Warning:
4