AAXA Technologies M1 Ultimate User Manual - Page 9

Browse online or download pdf User Manual for Projector AAXA Technologies M1 Ultimate. AAXA Technologies M1 Ultimate 18 pages.

Print Page

General Operation

Connecting to a VGA / Computer input

The projector can accept a 15-pin RGB input

source from a laptop's external monitor port

or graphics card. This source is connected

through the 15-pin "VGA" port on the back

of the projector.

To connect a VGA cable, plug the VGA cable into

the back of the projector. Then select the "VGA PC" option in the Main Menu.

This will enable the projector to receive VGA signals.

Important: Be sure to setup the computer to enable video signal output. If

using the M1 as an external monitor on Windows based systems, this can be

done by selecting "extend my desktop to this monitor. " Note: Each computer

system is different – please check with your owner's manual for how to

properly output video signals. Some Apple computers may require a DVI to

VGA adapter.

Accepted Display Resolutions:

Connecting an Audio/Video input source - The Projector can accept differ-

ent A/V (Audio/Video) sources through the A/V port. These sources are

connected through a 3.5mm A/V cable.

Max Supported Resolutions:

NTSC: 720x480

PAL: 720x576

800x600 (native / optimal)

1024x720

1280x800