AVLink 128.513UK User Manual

Browse online or download pdf User Manual for Amplifier AVLink 128.513UK. AVLink 128.513UK 2 pages. Pre-amplifier for turntables

Print Page

Thank you for choosing the STP-2 stereo phono pre-amplifier as part of your audio system. A compact ultra-

low noise pre-amp that amplifies phono signals from a turntable to line level signals. The unit can be powered

using the provided UK power supply or additional 9V battery if preferred (not supplied) and comes fitted with

a grounding screw to eliminate additional noise from inference.

Technical Specifications:

Power supply

Battery (optional)

Equalization

Frequency response

Gain

Input impedance

Output impedance

Dimensions

Weight

Connections:

Operation:

1. Ensure your turntable is fitted with a magnetic cartridge.

2. Connect the phono outputs and ground screw from the turntable to the RCA inputs (1&2) and ground

screw (4) of the STP-2 via a good quality RCA & ground lead (109.543UK recommended).

3. Connect the RCA outputs (8&9) and ground screw (4) from the STP-2 to the line/auxiliary inputs and

ground screw of the mixer or amplifier.

4. Connect the supplied 9V power adaptor to the 9V DC input (6) and move the on/off switch (5) to "ON".

5. Alternatively loosen the battery compartment screws (3&7), lift the lid upwards and insert a 9V PP3

battery, ensuring you match the polarity.

6. The STP-2 will now boost the turntable output from phono to line level.

www.avsl.com

9V DC, 100mA

9V DC (1 x PP3)

RIAA correction

30Hz - 20kHz

34dB

50k ohms

30 x 70 x 90mm

250g

Pre-amplifier for Turntables

1. RCA input (right)

2. RCA input (left)

3. Battery compartment screw

4. Ground screw

5. On/off switch

6. 9V DC input

7. Battery compartment screw

8. RCA output (right)

9. RCA output (left)

Item ref: 128.513UK

User Manual

128.513UK User Manual