Aqua Creek F-105LAR Instructions - Page 2

Browse online or download pdf Instructions for Lifting Systems Aqua Creek F-105LAR. Aqua Creek F-105LAR 3 pages. Pull-out legrest

Print Page

The PULL-OUT LEGREST ASSEMBLY is designed to fit under the standard Aqua Creek chair, and is

installed inside the 2" square tubing that supports the chair from underneath. To install the pull-out

leg-rest;

1. With a flat-blade screwdriver, pry off the 2" square plug from the end of the 2" square tube of the

seat arm.

2. Drill a 9/32" hole at the location indicated in the drawing below through the bottom of the chair

support tube. Drill only through the bottom of the tube. Remove the burrs from the hole before

installing the legrest assembly.

Installation Instructions:

2" SQUARE

PLUG

DRILL

(BOTTOM OF CHAIR SUPPORT TUBE)

(SEE DRAWING TO THE RIGHT)

SEAT

SEAT ARM

DRILL

9/32"

(THIS SIDE)

CHAIR SUPPORT TUBE

(BOTTOM VIEW)

9/32" HOLE

3/4"

Revised 12/13/16