Aqua Creek Products LIBERTY LIFT Installation, Assembly, And Operating Instructions For The Installer - Page 9

Browse online or download pdf Installation, Assembly, And Operating Instructions For The Installer for Lighting Equipment Aqua Creek Products LIBERTY LIFT. Aqua Creek Products LIBERTY LIFT 15 pages.

Print Page

BATTERY SYSTEM OPERATING AND INSTALLATION INSTRUCTIONS

24V SEALED BATTERY

The Liberty Lift

charging unit (with mounting bracket), control box, and a waterproof handheld controller. The

control box is mounted to the Liberty Lift

the handheld controller. The battery mounts directly above the control box with a quick-

release clip.

The lift should be able to complete approximately 10-20 full cycles before the low battery

indicator light on the handheld controller illuminates. The low battery indicator indicates

approximately 20% battery life remaining. At this point, it is suggested that the battery be

removed from the unit and recharged on the wall mount-charging unit.

To recharge the battery, simply grip the top of the battery and depress the clip on the back of

the battery. This will unclip the battery from the control box bracket and the battery can then

be clipped into the wall mount charger. When the battery is correctly mounted to the charger,

the CHARGE light will illuminate. When the battery is fully charged, the CHARGE light

will GO OFF and you can return the battery to the KIEFER ACCESS Lift

APPLYING DIELECTRIC GREASE: In order to keep the battery/control box terminals from

corroding a small packet of dielectric grease has been provided with the Liberty Lift. The

Liberty Lift will arrive with dielectric grease already applied to the terminals, but it is

recommended that more grease be applied to the terminals every 6 months, or as often as

needed to keep the terminals corrosion free. Apply the grease as shown in the figure below.

WALL MOUNT

CHARGER

Battery system comes with a 24v sealed rechargeable battery, wall mount

CONTROL BOX

and has a plug-in socket for both the actuator and

HANDHELD CONTROL

CONTROLLER