Aqua Creek Products F-PTN-00 Operator's Manual - Page 6

Browse online or download pdf Operator's Manual for Fitness Equipment Aqua Creek Products F-PTN-00. Aqua Creek Products F-PTN-00 8 pages.

Print Page
Once the cable has been completely strung on both sides, check that the bump stop on the truck
weight rails is 1-2 inches above the stop tube. This is to ensure there is proper tension on the
cable so that it does not pop out of any of the pulleys while in use. If adjustment is needed on
either or both sides, tighten or loosen the nut that is part of the hook where the end of the cable
is attached. See FIG. 4 below.
6
Copyright © 2020 Aqua Creek Products All Rights Reserved
ProTone Main Wire Assembly
MAIN WIRE ROPE
ADJUST THIS NUT
TO ADD OR RELEASE
TENSION ON THE CABLE
BUMP STOP SHOULD BE 1-2 INCHES
ABOVE THIS STOP TUBE.
TRUCK WEIGHT RAIL
FIGURE 3
FIGURE 4
Revised 12/14/20