AVM EVOLUTION CD 3.2 Operating Instructions Manual - Page 12

Browse online or download pdf Operating Instructions Manual for CD Player AVM EVOLUTION CD 3.2. AVM EVOLUTION CD 3.2 14 pages.
Also for AVM EVOLUTION CD 3.2: Operating Instructions Manual (14 pages)

Print Page

3.2 Reset menu (Factory Settings)

This function cancels certain or all settings and makes the unit return to default settings.

To enter the reset menu, please switch off your device on the rear of the unit at the mains switch (29).

Keep both the REPEAT button (6) and the STOP button (10) pressed while you switch on the unit again

(29). As soon as the display shows the reset menu you can release both buttons (6, 10).

Select if you just want to clear the input names (NAMES) with the PAUSE button (10) or reset the unit

completely (ALL) by pressing the PLAY button (12).

Pressing the STOP button (10) will bring the unit back to normal operating mode without resetting any

item (CANCEL).

4 Cleaning

Use a soft cloth and normal glass cleansing fluid.

CAUTION: Make sure that no fluid comes into the unit. Do not use scouring cleaners. They may

damage the surface.

5 If something doesn't work...

Some putative defects are often caused by mistakes in operation. Sometimes other units connected to

the amplifier can cause problems. Therefore please read the following tips before you consult your

dealer.

1. No music playback

a) Inadvertent switching to standby by remote control. Press power button (1). If the LED indicator

and display do not light up a fuse can be blown due to overvoltage (thunderstorm). Please contact

your dealer.

2. Unit switches off during normal operation

This can happen if the temperature inside the unit becomes too high. In this case the CD player

switches off and the display shows 'overheat'. Switch the unit off and let it cool down for five minutes.

3. Remote control doesn't work

a) Change the battery of your RC 3 remote control (see 1.7.1).

b) Point with the remote control transmitter directly to the unit.

5. The display shows „now disc" although a CD is inserted

Please make sure the CD has not been damaged and is inserted with the correct side facing up

Please clean your CD with a soft cleaning cloth