AvMap geosat5 APRS Setup Instructions - Page 3

Browse online or download pdf Setup Instructions for Transceiver AvMap geosat5 APRS. AvMap geosat5 APRS 9 pages.

Print Page

Introduction

APRS is a method for sending and receiving position and other information over a radio transceiver.

The Geosat 5 is ready to accept APRS inputs from a radio transceiver, and to provide fix position

output data to the transceiver in order to transmit your current position.

The Geosat 5 comes with a cable that is pre-wired for use with designated Kenwood radios. The

input/output port used for APRS is the same port that is used for TMC, and is labeled TMC on the

back of the Geosat 5. Due to the multi-use of the TMC port, it is not possible to operate APRS and

TMC simultaneously.