Aqua Jet SA 3995 Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Diving Instrument Aqua Jet SA 3995. Aqua Jet SA 3995 10 pages. Hammer head

Print Page

If the control trigger is pressed and the motor driver does not respond or function properly

1. Check whether the battery compartment is attached to the driver firmly and ensure that

the battery is fully charged. Also check whether there are any obstacles around the spring

mechanism of the motor unit bracket that may affect the operation of the spring control

2. If the tension of the control wire is incorrect, the motor may not start when the control trigger is

released. Adjust when necessary as per the following instructions:

-Unlock the control wire cable by rotating the locknut counter clockwise as indicated in

diagram 17

-To increase the tension of the control wire cable, rotate the tension barrel counter clockwise

a few turns and hold in place as indicated in diagram 17

-To loosen the tension of the control wire cable, turn the tension barrel clockwise

-Upon completion of the adjustment, the control wire cable must be locked tightly by

rotating the locknut clockwise as indicated in diagram 18

diagram 17

LOCK NUT

TENSION

BARREL

diagram 18