COZY BFT301 and Installation And Operation Instructions Manual - Page 9

Browse online or download pdf Installation And Operation Instructions Manual for Heater COZY BFT301 and. COZY BFT301 and 19 pages. Blue flame vent free heaters
Also for COZY BFT301 and: Installation And Operation Instructions Manual (19 pages), Installation And Operation Instructions Manual (18 pages)

Print Page
INSTALLING
HEATER
WALL
MOUNT
(BFT10)
STEP 1. Remove wall mounting bracket from back of
heater.
STEP2. Locate walt stud.
STEP 3. Attach wall mounting bracket to wall stud
with top at desired height, using (2) screws provided.
Make sure top of bracket is level. See Figure 3.
STEP 4. Hang top of heater on wall mounting bracket.
STEP5. Remove bottom front panel.
STEP 6. Secure back of heater to walt, utilizing
anchors (if necessary) or wood screws. See Figure 4.
WALL STUD
O
O
O
O
-_WALL
OUNTING
BRACKET
FIGURE 3
J
/
HOLES FOR MOUNTING BACK OF
HEATER TO WALL
FIGURE 4
WALL
MOUNT
BFT20 & BFT30
STEP 1. Relnove wall mounting bracket fiom back of
heater.
STEP 2. Locate two studs.
STEP 3. Attach wall mounting bracket to wall studs with
top at desired height using (2) wood screws provided.
Make sure top of bracket is level. See Figure 5.
STEP 4. Hang top of heater over wall mounting bracket.
STEP 5. Remove bottom front panel.
STEP 6. Secure back of heater to wall, utilizing anchors (if
necessary) or wood screws. See Figure 4.
0
o
0
©
°
©
FIGURE 5
INSTALLING
VF-FSK
FLOOR
BASE
KIT
STEP 1. Remove floor base fioln carton.
STEP 2. Aliml screw holes in base to holes in heater
bottom.
STEP 3. Align cut-out in bottom of heater with the cut-out
in top of floor base. The cut-out in side of floor base must
face towards the back of the heater (see illustration below).
STEP 4. Attach floor base to bottom of heater using four
#8 screws (provided).
NOTE:
Floorbases are foruse on BFT10, BFT20 and
BFT30.
HEATER
.J
/lake sure this cut-out
faces back of heater.
Page 9