COZY BFT301 and Installation And Operation Instructions Manual - Page 14

Browse online or download pdf Installation And Operation Instructions Manual for Heater COZY BFT301 and. COZY BFT301 and 18 pages. Blue flame vent free heaters
Also for COZY BFT301 and: Installation And Operation Instructions Manual (19 pages), Installation And Operation Instructions Manual (19 pages)

Print Page

INSTALLING THE VFB BLOWER (BFT201 / BFT202, BFT301 / BFT302 MODELS ONLY)

STEP 1. Remove blower assembly from shipping carton.

STEP 2. Insert blower assembly into upper back of heater (See Figure 11).

STEP 3. Secure blower to heater using three #8 screws (provided) through holes pre-punched in heater back.

STEP 4. Locate mounting holes for switchbox (See Figure 11).

STEP 5. Secure switchbox to heater using two #8 screws (provided).

STEP 6. Plug power cord into 115 volt three-prong grounded receptacle.

CAUTION:

Always unplug power cord before servicing or cleaning heater. This appliance is equipped with a three-

prong (grounding) plug for your rotection against shock hazard and should be plugged directly into a

properly grounded three prong receptacle.

Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper

and dangerous operation. Verify proper operation after servicing.

FIGURE 11

BLOWER INSTRUCTIONS

Blower Motor

If any of the original wire supplied with

the appliance must be replaced, it must

be replaced with a wire of at least a

105

C temperature rating.

WIRING DIAGRAM / VFB BLOWER

Page 14

Switchbox

Blower Assembly

Fan

Switch

Power

Cord