Aqua Lung EB001003 User Manual - Page 6

Browse online or download pdf User Manual for Diving Instrument Aqua Lung EB001003. Aqua Lung EB001003 20 pages. Survival egress air

Print Page

WARNING:

household oil or motor oil to any part of SEA. Lubrication is not required

under normal circumstances, except during service performed by a

manufacturer trained service technician.

WARNING:

whenever it is submerged in order to prevent the ingress of water into

the system. If SEA has been completely emptied of air underwater, it

is important to return it as soon as possible to a manufacturer trained

service technician for visual inspection and any necessary service before

attempting to refill it.

WARNING:

vapor content that does not exceed -53°C dew point. Excess water vapor

in the air can cause ice to form inside the system and interfere with the

operation of SEA at colder temperatures.

WARNING:

place to prevent over pressurization of SEA. Systems shall be deemed

over pressurized at 5% above working pressure. Should SEA be over

pressurized, a manual purging of the system via the second stage is

necessary to reduce the pressure in the cylinder. It is especially important

to inspect the indicator when transitioning from cold to hot environments,

due to thermal expansion of the gas.

NOTE: When instructed to remove, unscrew, or loosen a part, turn the part

counter-clockwise.

When instructed to install, screw, or tighten a part, turn the part clockwise.

NOTE: When instructed to "OPEN" the handwheel, turn the handwheel

counter clockwise. The red indicator ring will not be visible in the

handwheel window, this indicates SEA is in the "ON" position.

When instructed to "CLOSE" the handwheel, turn the handwheel clockwise.

The red indicator ring will be visible in the handwheel window, this indicates

SEA is in the "OFF" position.

NOTE: When instructed to depressurize SEA, close the handwheel and

depress the second stage purge button for 5 seconds and release for 5

seconds. Repeat this procedure until SEA is depressurized.

DO NOT apply any type of petroleum based lubricant, such as

It is important to ensure that SEA is always pressurized

It is important to fill SEA only with dry, filtered air with a water

Periodic inspection of dial indicator readings shall take