Aqua Medic M-ventil Standard Operation Manual - Page 4
Browse online or download pdf Operation Manual for Aquariums Aqua Medic M-ventil Standard. Aqua Medic M-ventil Standard 9 pages.
Print Page
For controlling the CO
•
For controlling reverse osmosis systems
•
The Aqua Medic M-ventil Standard is a product of highest quality, safe and reliable for more pleasure with your
aquarium. A time dependant CO
The solenoid valve may also be monitored via a pH controller to achieve a maximum degree of comfort with
ideal carbon dioxide provision at all times.
1. Technical details:
Function:
Material:
Nominal width:
Operating pressure:
Medium:
Connection:
Voltage:
Power consumption:
Operating factor:
2. Operation with CO
2
Set-up:
The solenoid valve is pre-mounted and tested. It has only to be integrated into the CO
of the valve, you find an arrow that indicates the direction of the flow.
At first, the hose is mounted on the inlet (4):
1.
Unscrew the knurled nut of the CO
2.
Push the knurled nut over the flexible pressure tube (6/4 mm, ¼").
3.
Push the end of the tube over the nipple (4).
4.
Screw the knurled nut onto the nipple and tighten it.
5.
Mount the other end of the flexible tube onto the pressure outlet of the pressure reducer and tighten it.
6.
Now, a tube is mounted in the same way on the outlet (5). Here, you do not need to use a pressure tube,
you may use ordinary PVC-tube (6/4 mm, ¼").
7.
The free end is connected to the bubble counter inlet or to the CO
8.
If you use a pressure regulator with adjustable operating pressure, set it to 1 – 1.5 bar.
Note: Always use a non-return valve between the aquarium and solenoid valve. It prevents water from flowing
back from the aquarium into the regulator and the CO
to use the original Aqua Medic bubble counter with integrated non-return valve.
4
Operation manual ENG
supply in aquaria
2
–intake can be realized using a timer together with this valve.
2
2/2 directions, closed and currentless
chrome-plated brass
2 mm, 0,08"
0 – 4 bar
gas, tap water
flexible hose, 6/4 mm (1/4")
230 V, if not otherwise noted
2,5 watts
100%
connection (4).
2
–inlet.
2
–bottle and may cause damage. We recommend
2
1. Body of the valve
2. Magnetic reel
3. Power cord
4. CO
-inlet
2
5. CO
-outlet
2
–system. On the body
2