ABACO MACHINES AWT7523C Operation Manual - Page 8

Browse online or download pdf Operation Manual for Indoor Furnishing ABACO MACHINES AWT7523C. ABACO MACHINES AWT7523C 16 pages. Working table

Print Page

III. SAFETY INSTRUCTIONS:

a. Before operations:

Before operation make sure the following:

- All nuts and bolts are tightened securely.

- All four swivel casters are locked safely.

- The Working Table is placed on a flat and smooth surface, not on a

wavy or rough surface.

- The Working Table is in good operating condition.

- The rubber pad are clean, no dust, oil or debris on it.

- Confirm all the welded joints are free from any defects or damage,

such as separation, crack, and so forth.

- Use appropriate PPE (Personal Protective Equipment)

to protect

against injury.

b. During operations:

- Make sure the weight of the slabs being placed is within the

specified W.L.L (Refer to the table at page 1).

Follow the steps and instructions in this operation manual.

- For safety purposes, you (the operator) are responsible for

following all applicable laws and regulations in your region.

c. After operations:

- Clean the Working Table thoroughly after each use.

- Store in a well-ventilated place, avoid places with high heat or

humidity.

Note:

See Maintenance Instructions section in this manual for more

details.

AWT7523C - Operation Manual