Avol AIS500 Instruction Manual - Page 10
Browse online or download pdf Instruction Manual for Docking Station Avol AIS500. Avol AIS500 12 pages.
Print Page-
If they are connected, display panel shows
"BT".
-
If the connection is lost, display panel shows
"NO BT". Follow the instruction above to pair
your device to the player again.
Pair with Bluetooth-enabled Device
Using One Touch (NFC)
Using an NFC compatible bluetooth device, you
can establish a bluetooth connection by just
touching the unit with it.
Make sure bluetooth and NFC function is
enabled on your device .
1 Turn on the NFC function on your device.
-
Make sure your device is in the wake-up
mode.
2 Turn on the unit and switch to bluetooth
source.
3 Touch the NFC sensing area with your device,
the unit will pair and connect with your device.
4 Touch this area again, the unit will disconnect
the bluetooth connection.
Tips:
Some NFC-enabled mobile devices cannot
pair directly with the unit via NFC, please try
either one of the solutions below:
•
Please download the Apps "Tap-and- Pair"
from Google Play Store(https:// play. google.
com) and install.
•
Pair with the unit manually fi rst, then touch
again on the NFC sensing area.
NFC-enabled mobile devices with Android V4.2
or higher don't need to install the Apps.
Listen to Music from Bluetooth Device
If the connected Bluetooth device supports
Advanced Audio Distribution Profi le (A2DP),
you can listen to the music stored on the
device through the player.
If the device also supports Audio Video
Remote Control Profi le (AVRCP) ,
you can use the player's remote control
to play music stored on the device.
1. Pair your device with the player.
2. Start to play music via your device
(if it supports A2DP)
3. Use supplied remote control to
control play(if it supports AVRCP)
-
To pause/resume play, press the
-
To skip to a track, press the
Listening to the FM Radio
Tuning in a Station
1 Press the FM button to select the FM source.
2 Press and hold the
frequency changes down or up automatically
until a station is found.
3 Press
/
H
G
fi nd the station you want.
Presetting Stations
You can preset up to 20 FM stations.
Program radio stations automatically
Press and hold the PROG button for 2 seconds
to activate automatic programming. All available
stations are programmed in the order of
waveband reception strength.
-
The fi rst programed radio station is played
automatically.
Program radio stations manually
1 Tune in the desired station, then press the
PROG button.
2 Press the
/
number.
3 Press the PROG button to store the station.
9
BF
/
H
G
/
buttons, the
H
G
buttons repeatedly until you
buttons to select the preset
button.
buttons.