Fender 410 PRO Service Manual - Page 4

Browse online or download pdf Service Manual for Speakers Fender 410 PRO. Fender 410 PRO 8 pages. Fender bass amp model 410 pro sl owner's manual
Also for Fender 410 PRO: Operating Instructions Manual (12 pages)

Print Page

INPUT PANEL removal is required for fuse

replacement and is accomplished by following

these steps:

1. Remove the 4 screws from the input panel cor-

ners.

2. Pull the panel out, then up.

Parts marked with a single asterisk (

Lists are not field replaceable. If a failure due to

one of these components is detected, please con-

BASSMAN® 410 PRO SL LOUDSPEAKER

SERVICE NOTES

PCB EXCHANGE POLICY

) in the Part

(This is the model name for warranty claims)

3. Use a small flathead screwdriver to remove the

blown lamp, which is visible through a cutout in

the circuit board.

4. Remove the spare lamp stowed on the side of

the circuit board and install it where the blown

lamp was removed.

5. Install the input jack plate in the reverse of re-

moval.

tact

the

Fender®

dealer

Department to order the complete PCB Assembly.

Customer

Service